Skip to main content

eufysmrtcam.com

We are an independent third-party support provider and are not affiliated with, authorized, or endorsed by any brand mentioned on this website.

Eufy E220 SetupA Step-By-Step Guide

To complete the Eufy E220 setup, once you have connected your camera to a power source, downloaded the Eufy Security app, and logged into your account, click Add Device. Then scan the QR code on your camera, connect your camera to a 2.4 GHz-compatible Wi-Fi network and follow the on-screen prompts. Your camera will be connected, and you can customize your camera, set up motion detection, set recording options, and store videos to your microSD card.

Correctly setting up your security camera is key to ensuring that it works well to monitor your home and record footage. The Eufy E220 setup is simple to connect your indoor camera to your home Wi-Fi network. This can be done using the Eufy Security app. If you’re adding a new camera, you can follow these steps to make it easier. This guide will show you how to install your Eufy Security Indoor Cam E220 2K, insert an SD card, fix any issues with connecting to Wi-Fi, what the red light means, and how to update the firmware of your camera.

What You Need Before Eufy E220 Setup?

Now that you are beginning the Eufy E220 setup, you need to ensure that you have everything you need. You will need the Eufy E220 camera, the included adapter and cable for power, a strong Wi-Fi connection, a smartphone with the Eufy Security app installed, and a Wi-Fi password.

Below are some key requirements:

  1. Stable Wi-Fi – If your model requires it, ensure you have a strong 2.4 GHz network.
  2. Eufy Security App – Ensure the official app is downloaded on your smartphone. This can be found on the Google Play Store or Apple App Store.
  3. Eufy Account – Create an account or log into Eufy Security using your existing details.
  1. Power Supply – Use the correct power supply provided or recommended.
  2. MicroSD – If you wish to store videos locally, then ensure you have a compatible microSD card.

Note: Ensure your smartphone is near the camera and router to ensure you have a smooth connection.

Eufy outdoor cam E220 installation

Before you get started, ensure that the camera has the correct name and is an outdoor or indoor model. The E220 is often referred to as the Eufy’s Indoor Cam 2K Pan & Tilt so do not place the indoor camera outside. If your camera is an outdoor model, then please follow any specific waterproofing instructions and mounting instructions.

If you have a compatible outdoor Eufy E220 setup, then follow these steps:

Try to avoid placing your camera behind thick walls, metal objects or anything that might cause interference with the wireless signal.

Setting up Eufy security indoor cam E220 2K

The Eufy security indoor cam E220 setup​ is easy with an app. It has a 2K camera for monitoring and a pan-tilt function.

Steps:

  1. Connect the power source to your camera: Put your E220 close to your router, then plug the power cable into a suitable socket.
  2. Download the app: Download the Eufy Security app onto your smartphone.
  3. Log in to your account: Open the Eufy Security app and log in to your Eufy account.
  1. Tap on the + symbol: Tap the plus button on the home screen.
  2. Select your camera: Choose the correct Indoor Cam from the list.
  3. Scan the QR code: Follow the instructions to scan the QR code on the camera.
  4. Select your Wi-Fi: Choose your Wi-Fi and enter the correct password.
  5. Complete the pairing: Follow the instructions on the app and wait for it to pair.
  6. Test the camera: Open up live view and test the quality of the camera, motion detection, and pan/tilt.

Once it’s connected, put it in a place where it can see key areas like entrances, hallways, or living areas.

Eufy E220 SD card installation

The Eufy E220 SD card install process allows you to save recordings locally. Before inserting an SD card into your camera, please refer to the user manual to find out which size and type of microSD card is recommended.

  1. Turn off your camera.
  2. Find the microSD card slot on the camera. On indoor panning cameras, the slot will generally be located underneath the camera head.
  3. Insert the microSD card into the slot (ensure it is inserted the correct way).
  4. Turn the camera back on.
  1. Open the Eufy Security app and go into your camera settings.
  2. Navigate to the Storage/Local Storage option. If prompted, format the card. 
  3. Once inserted, check that the card is detected and set it to record continuously or on event.

Eufy E220 Not Connecting to WiFi

Your Eufy E220 not connecting to WiFi because of incorrect network details, poor signal strength or compatibility issues with your router. As the E220 requires a 2.4 GHz Wi-Fi connection, ensure your phone and camera are set up on the correct network.

Try the following steps:

  • Ensure your Wi-Fi details are correct. Ensure the name & password are correct.
  • Restart your router. Turn your router off for about 30 seconds and turn it back on.
  • Place the camera close to your router. Ensure your camera is close to your router when trying to pair.
  • Ensure you’re connecting via a 2.4 GHz network.
  • Unplug your camera. After a few seconds, plug your camera back in.
  • Factory reset your camera. If you are having trouble pairing, factory reset your camera and set up again.
  • Disable any VPN services on your phone. This will help you successfully set up your Eufy.

For successful Eufy setup WiFi, temporarily disable VPN services on your phone and check whether your router’s security settings allow the camera to connect. 

Eufy E220 Red Light: What Does It Mean?

The Eufy E220 will have a red light that can mean a few things.

  • Blinking red light – This usually means that the camera isn’t connected to the internet.
  • Single red flash – Motion or noise has been detected.
  • Solid red light – Someone may be watching the live stream or recording an event.
  • Flashing blue/red – A firmware update is taking place.
  • If the light continues to blink while red, we would suggest you make sure that you are connected to your Wi-Fi. 
  • Restart your router and reconnect the camera via the app. 
  • Don’t unplug the camera while a firmware update is taking place.

How to Complete the Eufy E220 Firmware Update?

Updating your firmware can help improve performance, security, and compatibility.

  • Open up the Eufy Security app on your phone.
  • Select your Indoor Cam E220.
  • Select the settings tab.
  • Look for an option to update firmware/device.
  • Check if there is an update available and install it.
  • Ensure your camera is plugged in while the update is complete.
  • Your camera may restart automatically.

Note:  Ensure you do not unplug your camera.

Eufy E220 vs E330

Eufy E220 and E330 cameras have been designed for different purposes. E220 is for indoor use, whilst E330 Professional is for outdoor use.

Feature

Eufy E220

Eufy E330

Camera Type

Indoor

Outdoor

Resolution

2K

4K

Type

Plug-in

Wired

Usage

Indoor

Outdoor

View

Pan & Tilt

Fixed

If you need an affordable indoor camera that can be used to monitor your pets and cover rooms, the E220 would be best suited to your needs. If you want a higher-quality camera to monitor outdoors, then the E330 would be more suitable. 

Note: You will need to refer to the Eufy E330 setup guide when installing, as there are different requirements for installation and storage.

Common Eufy E220 Setup Problems and Solutions

If you are still having trouble with your camera, have a look at some common issues and how to fix them below.

Frequently Asked Questions

Does Eufy E220 need a home base?

No, the Eufy E220 will not require a HomeBase, as the camera can be connected directly to your Wi-Fi (2.4GHz). However, it can be used with the HomeBase 3.

Yes, the E220 does support local storage using a microSD card. You will require a compatible Class 10 card of no more than 128 GB. However, these are typically sold separately.

The microSD slot can be found on the front of your camera below the lens. Insert the card carefully, ensuring the card is facing the correct way. Once inserted, you will be able to access the storage settings within your app.

Typically, this means your camera has lost connection to the internet. Ensure your router is working correctly, double-check your Wi-Fi password, and restart your camera. If you still have issues, ensure you reconnect your camera via the app.

Yes, you can monitor the camera in real-time using the Eufy Security app. Simply login to your account on your smartphone with internet access and choose your camera. You can also receive motion alerts and access your recordings if they are available.

No, the Eufy Indoor Cam E220 will only support 2.4GHz networks. Ensure you connect your camera to a compatible 2.4GHz network during setup. If your router has both 2.4GHz and 5GHz networks, ensure your settings are correct or try to separate your networks.

This could be due to a weak Wi-Fi signal, router outages, incorrect network settings or power issues. Restart your router, check the camera’s power source, and reconnect your camera via the app.

Yes, you can record locally using your compatible microSD card. You can save your recordings and access your available playback features via the app. However, cloud storage may require you to pay for an optional plan.

Request a Call Back for an Instant Assistant


This will close in 0 seconds